TARGET

Turn off the light when not in use, Keep the future bright. The electric bill won't give you a fright if you remember to turn off the light. Like Money saved is Money earned, Power Saved is Power Generated.

Translate

Popular Posts

  • TESTING & COMMISSIONING ENGINEER INTERVIEW QUESTIONS
      ANSWER'S UPDATING SOON...........
  • FAT procedure for LV switchboards
    Factory Acceptance Test (FAT) procedure Visual Inspection Test Visual inspection with customer will be carried out on the LV switchboa...
  • Transformer theory
    Transformers are required throughout modern interconnected power systems. The size of these  transformers ranges from as low as a few kVA ...
  • Wave Trap
    Wave trap is a parallel tuned inductor - capacitor tank circuit made to be resonant at desired communication frequency . It reduces ...
  • Knee point voltage
    How to calculate Knee point voltage for CT Knee Point Voltage, Vk = [(VA/Is^2) + Rct]*ALF*Is VA = CT Burden, Is     = Second...
  • Why is the transformer rated in KVA?
    kVA is the unit for apparent power. Apparent power consists of active and reactive power. Active power is the share of the apparent p...
  • Testing & Commissioning engineer interview questions and answers (***Important***)
    Dear Engineers spend some time to read this article fully which helps to crack most of the MNC interviews. Ultimately the following points a...
  • vector group
    Why is vector group important? Because it determines the phase angle displacement between the primary (HV) and secondary (LV) wi...
  • Lightning Arrester or Surge Arrester
    An electrical surge can be occurred in an electrical power transmission system due to various reasons. Surge in an electrical system or...
  • Current transformers
    Principle of operation   of CT A current transformer is defined as “as an instrument transformer in which the secondary current is subst...

Tuesday 13 August 2019

Load losses

Load losses

These losses are commonly called copper losses or short circuit losses. Load losses vary according to the transformer loading.
They are composed of:

Ohmic heat loss

Conductor eddy current losses

Auxiliary losses

These losses are caused by using energy to run cooling fans or pumps which help to cool larger transformers.
Posted by at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)