Popular Posts
-
Factory Acceptance Test (FAT) procedure Visual Inspection Test Visual inspection with customer will be carried out on the LV switchboa...
-
Transformers are required throughout modern interconnected power systems. The size of these transformers ranges from as low as a few kVA ...
-
Wave trap is a parallel tuned inductor - capacitor tank circuit made to be resonant at desired communication frequency . It reduces ... -
Dear Engineers spend some time to read this article fully which helps to crack most of the MNC interviews. Ultimately the following points a...
-
How to calculate Knee point voltage for CT Knee Point Voltage, Vk = [(VA/Is^2) + Rct]*ALF*Is VA = CT Burden, Is = Second...
-
This is the significance of saturation level of a CT core mainly used for protection purposes. The sinusoidal voltage of rated frequency ap... -
kVA is the unit for apparent power. Apparent power consists of active and reactive power. Active power is the share of the apparent p...
-
Why is vector group important? Because it determines the phase angle displacement between the primary (HV) and secondary (LV) wi...
-
What are the most important skills of an electrical test engineer to have? This question can help the interviewer determine if you have the ...
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment